Accessories convectors




  TO BUY

Figure
DescriptionArticle ID
Connection set for convectors
consisting of thermostatic valve, lockshield without emptying, IG 1/2 ", through
Anschluss-Set fr Konvektoren
Connection set convector
Radiator connection with cone, pipe thread R 3/4 " cone, centre distance 40mm, thermostat connection M 28x1.5
for single pipe operationAnschlussgarnitur Konvektoren Einrohr
for double pipe operationAnschlussgarnitur Konvektoren Zweirohr
Source air supply / air-inlet
connecting piece with pipe, diameter 70 mm
(other sizes on request)
QL-A
Thermostat head with remote adjustment
with liquid sensor, capillary tube and valve core, temperature range 6-30 C
Capillary tube length 2000 mmTherm2
Capillary tube length 5000 mmTherm5
Capillary tube length 8000 mmTherm8
Thermo motor for 2-point or pulse control
normally closed, 230 V, 50 Hz
Thermomotor
DDC-actuator for continuous operating
Operating voltage 24 V, controlling voltage. 0 - 10 V DC, max. 10 units per controller
DDC-Stellantrieb
Room thermostat wall mounting 230V
turning handle for variable temperature setting, 10 C to 30 C, night mode 5 K, for thermo motor, normally closed
RTS
Room temperature controller for flush mounting
turning handle for variable temperature settings, 5 C to 30 C, time-controlled operation over external switch clock possible, switching capacity 1.8 kW
normal designRTR-Standard
Busch-Jaeger-designRTR-Standard B
Room temperature controller for flush mounting
with electronic temperature control and timer, 5 C to 30 C, adjustable via rotary knob, daily 2 x hot / reduced temperature, programmable, separately for working days and rest days programmable, permanent connection, ON / OFF, switching capacity 1.8 kW
normal designRTR-Komfort
Busch-Jaeger-designRTR-Komfort B
Room temperature controller for flush mounting, power supply operation
with electronic temperature control 5 - 30 C and program control, 6 times per day, Clock, week program, day program, vacation mode 1 h to 199 days, maintained, frost protection below 5 C, switching power 1.8 kW
normal designRTR-Komfort Plus
Busch-Jaeger-designRTR-Komfort Plus B
Room thermostat with three-stage speed switch
OFF + 3 steps, set the desired temperature of 8 - 30 C, operating voltage 250V / 50 or 60 Hz, contact load from 0.2 to 6 (2) A
RTR-1
Impulse controller for the room temperature with automatic speed switch
Set the desired temperature of 8-30 C, operating voltage 230V / 50Hz,
Control output 01: max. 230 VA
Control outputs 02, 03: max. 450 VA
RTR-2
Holding plates
Convector or panel mounting for shaft and lateral boundary, zinc plated version, available for shaft heights h4 300-800 mm
Depths up to 150 mm, zinc plated
Depths over 150 mm, zinc plated
Depths up to 150 mm, RAL 9016 / 7016
Depths over 150 mm, RAL 9016 / 7016
Medium plates
with the same function as holding plates, but with two adjustable brackets for thrusting of covering panels, zinc plated version
Depths up to 150 mm, zinc plated
Depths over 150 mm, zinc plated
Depths up to 150 mm, RAL 9016 / 7016
Depths over 150 mm, RAL 9016 / 7016
Suspension brackets
including brackets, with screws, zinc plated version
Depths up to 150 mm, zinc plated
Depths over 150 mm, zinc plated
Depths up to 150 mm, RAL 9016 / 7016
Depths over 150 mm, RAL 9016 / 7016
Wall brackets
adjustable with integrated sound insulation for all depths, zinc galvanized construction
WII zinc plated
WII RAL 9016 / 7016
Console stands
to screw, adjustable with integrated sound insulation for all depths
(can be shortened on request)
SII for finished floor, galvanized, BH 15 22.5cm
SIII for under concrete, galvanized, BH 25 to 32.5 cm
SII for finished floor, RAL 9016 / 7016, BH 15 22.5cm
SIII for under concrete, RAL 9016 / 7016, BH 25 to 32.5 cm
Underfloor slip shaft
for functional separation of hot and cold air flow channel in the floor, made of galvanized steel sheet
Shaft height 200 mm, zinc plated
Shaft height 300 mm, zinc plated
Shaft height 400 mm, zinc plated
Shaft height 500 mm, zinc plated
Shaft height 200 mm, painted in RAL 7016 anthracite
Shaft height 300 mm, painted in RAL 7016 anthracite
Shaft height 400 mm, painted in RAL 7016 anthracite
Shaft height 500 mm, painted in RAL 7016 anthracite
Comfort console
to screw, height 100 mm
F1 for finished floor, white
F2 for finished floor, color

Here you can download the data sheet with all available accessories:
Datasheet


  DOWNLOADS AND BROCHURE REQUEST
  CONTACT REQUEST