Accessories convectors




  TO BUY

Figure
DescriptionArticle ID
Connection set for convectors
consisting of thermostatic valve, lockshield without emptying, IG 1/2 ", through
ThroughAS1D
AxialAS1A
Filter mat 2000 x 95 mm
for CV, CVEC, CVHK, CVHKEC
FM
Source air supply / air-inlet
connecting piece with pipe, diameter 70 mm
(other sizes on request)
QL-A
Thermostat head with remote adjustment
with liquid sensor, capillary tube and valve core, temperature range 6-30 C
Capillary tube length 2000 mmFES2
Capillary tube length 5000 mmFES5
Capillary tube length 8000 mmFES8
Thermo motor for 2-point or pulse control
normally closed, 230 V, 50 Hz, 2 Watt
TM1
Thermo motor for 24 V DC
normally closed, 24 V DC, with 0-10 V control voltage
TM2
Room temperature controller for flush mounting
turning handle for variable temperature settings, 5 C to 30 C, time-controlled operation over external switch clock possible, for thermo motor, normally closed
normal designRTR-Standard
Busch-Jaeger-designRTR-Standard B
Room temperature controller for flush mounting
power supply operation, with electronic temperature control 5 - 30 C and program control, 6 times per day, Clock, week program, day program, vacation mode 1 h to 199 days, maintained, frost protection below 5 C, switching power 1.8 kW
normal designRTR-Komfort Plus
Busch-Jaeger-designRTR-Komfort Plus B
Room thermostat with three-stage speed switch
OFF + 3 steps, set the desired temperature of 8 - 30 C, operating voltage 250V / 50 or 60 Hz, contact load from 0.2 to 6 (2) A
RTR-1
Room temperature controller for surface mounting, network operation, speed control, timer
Electronic room thermostat with comfort, energy savings and protection operation and auto timer with 8 programmable timers. The fan operates in automatic mode or in manual mode at the selected speed. You can either rely on the default settings or make your own adjustments.
Operating voltage 230 V AC, 2-point, 3-point or PWM control outputs (triac)
Output for 1- or 3-speed fan
surface mounting
RTR-100T
Room temperature controller for surface mounting, network operation, speed controller
Electronic room thermostat with comfort, energy savings and safety operation. The fan operates in automatic mode or in manual mode at the selected speed. You can either rely on the default settings or make your own adjustments.
Operating voltage 230 V AC, 2-point control (relay)
Output for 1- or 3-speed fan
surface mounting
RTR-110
Room temperature controller for surface mounting, network operation, speed controller
Electronic room thermostat with comfort, energy savings and safety operation. The fan operates in automatic mode or in manual mode at the selected speed. You can either rely on the default settings or make your own adjustments.
Operating voltage 24 V DC
0 - 10 V control voltage for thermo motor TM2
surface mounting
RTR-160
Power supply 24 V
1,5 ANT1/1,5A
2,5 ANT1/2,5A
4,2 ANT1/4,2A

Here you can download the data sheet with all available accessories:
Datasheet


  DOWNLOADS AND BROCHURE REQUEST
  KONTAKTANFRAGE